ECLER XPA 5000 POWER AMPLIFIER !

Cost me around480 2 years ago so grab yourself a real bargain, one of the best amplifiers about The Ecler XPAPower amplifier series offers the renowned professional reliability of all Ecler amplifiers at an affordable price. The line consists of three models with power outputs of 300, 500 and 700 W per channel at 4 ohm. All models employ MOSFET amplification technology, are 2 rack units high and are based on a robust chassis with aluminium front panel. Thanks to their oversized power supply, these amplifiers can operate comfortably with 4 ohm and even 2 ohm loads. They feature balanced input connections via XLR3 and 1/4" Jacks. The outputs offer total versatility thanks to secure connection posts with standardized separation and Speakon® sockets. An electronic limiting system for avoiding signal overloads and a switchable subsonic filter are also on board. Features: • Highly effective progressive cooling system. Air flow rises as a function of amplifier temperature. “Back to Front” cooling system takes air from the rear and throws it out at the front panel. • Easily accessible input attenuation controls on the front panel may be locked with Ecler exclusive system. • Indicators for Signal Present (SP), Clipping (CLIP) and activation of protection circuits (PROT) • Effective protection systems against shortcircuit, excessive temperature due to accidental blocking of air flow or other circumstances, DC at the output… to protect the amplifier and loudspeakers. • Built-in, always active anticlip circuit • Switchable subsonic filter, 30 Hz 18dB/oct slope • Operating mode selector: STEREO, PARALLEL and BRIDGE • Input sensitivity selector (0.775, 1, 1,4V) • Balanced inputs via XLR3 and 6,35mm TRS Jack sockets • Outputs on connection posts and Speakon® connectors • Operation with 8, 4 and 2 ohm or 4 ohm in bridged mode. • 2 year warranty Technical Data: • POWER 20-20kHz 1% THD Both channels driven: • 4 Ohm Stereo: 498 WRMS • 8 Ohm Stereo: 314 WRMS • 8 Ohm Bridged: 996 WRMS • Peak power 2 Ohm Stereo: 1050 WRMS • Frequency response (-1dB/-3dB): 10Hz/120kHz • High pass filter (-3dB): 30Hz/18dB oct. • THD+Noise at 1kHz Full Pwr.: 0,05% • S+N/N 20Hz-20kHz at 1W/4 Ohm: 78dB • Damping factor 1kHz at 8 Ohm: 300 • Slew Rate: ±40V/ms • Input connectors: XLR3 & 1/4” Jack balanced • Input Sensitivity / Impedance: 0.775V, 1V, 1.4V/20kOhm Bal. 10kOhm Unbal • Signal present indicator: -40dB • Output connectors: Speakon & Binding Posts • Mains: Depending on your country. See characteristics in the back of the unit. • Power consumption (EN 55103-1): 675VA • Dimensions: 482.6 x 88 x452 mm • Weight: 17 kg